FAQ

General FAQs


Is Silego Technology ISO certified?
Does Silego have its own fabrication facilities?
Where does Silego have facilities?


GreenPAK (GPAK) FAQ

Why should I consider GPAK for my next design?
How should I pick the part that works best for my design?
What is the latest version of the GPAK Designer software?
Do I have to program GPAK in production?
What does Silego need from me to move into production on GPAK?
If Silego assists me with doing the design for GPAK, how long does it take to get the first version?
What is the accuracy of ACMP?
What is the accuracy of RC oscillator frequency?
What is the current consumption of each analog block (ACMP, ADC)?
What is the maximum data rate of GreenPAK3 and GreenPAK4?
Is it possible to control LED dimming or motor speed?
Can I apply a voltage higher than Vdd on an input pin?
What is the input impedance seen at the analog pin?
How is quiescent current defined and how is it so low?
What is propagation delay time of GPAK?
What is max. bandwidth or speed for ACMP in GPAK?
What is min. and max. delay time in GPAK?
How complex of a State Machine can be implemented?
What is the state of the pins at power on and during the power on sequence?
How does the part configure itself at start-up?
What type of NVM memory is onboard?
How can the Dev board emulate the design if the part is OTP?
Can I solder blank parts on my board and then program the NVM?
Is there any error checking (readback, checksum, ect…) done on the configuration data that is read from the NVM and loaded into the SRAM to ensure that the part has been configured properly?
The NVM is read each time the part powers up, so how many read cycles can the NVM reliably perform in its lifetime?
What sort of data is there concerning environmental effects (Temperature, radiation, etc…) on NVM reliability and lifetime?
What is the difference between GreenPAK2 Rev A and Rev B silicon?
How can I tell my Rev A and Rev B IC’s apart?


GreenFET (GFET) FAQ


What is the application for GFET3 integrated power switches?
How can I control the voltage ramp rate on GFET3 devices?
What is the smallest GFET3 available?
Does Silego provide demo kit and evaluation kit for GFET?
What is MSL level and RoHS status on GFET?


BCID FAQ


What does Battery charger ID mean?
What's the output current of Battery charger ID?
What is the difference between SDP, CDP and DCP?
What is Smart-CDP?


GreenCLK (GCLK) FAQ


What is GCLK?
Why should I use GCLK?
What is GCLK current consumption?
When and where should I use GCLK?
Is GCLK in mass production?
Does Silego provide an evaluation kit for GCLK?
What package types and sizes are available for GCLK?
What is the difference between GCLK1, GCLK2, and GCLK3?
Are there Application Notes written for GCLK?
What is MSL level and RoHS status on GCLK?
© 2016 Silego Technology. 1515 Wyatt Drive, Santa Clara, CA 95054.
Facebook LinkedIn Twitter YouTube Google