Navigation


Press Releases

Mar 7, 2014

Silego Technology Introduces 50% Smaller Dual 4.5 A Full Featured Load Switch


Amazing CuFETTM technology enables high performance dual 16 mΩ GreenFET3TM Load Switches in 1.0 x 3.0 mm package

SLG59M1527V

Santa Clara, CA – March 7, 2014 – Silego Technology introduces the SLG59M1527V, a 16 mΩ dual channel GreenFET3 load switch product based on Silego’s proprietary sub-micron copper power FET technology. This load switch can handle 4.5 A max current per channel for 9.0 A total. The device uses Silego’s CuFETTM technology to achieve low RDSON, smallest form factor and improved reliability.

The SLG59M1527 is a full-featured dual channel load switch packaged in a 14-pin STDFN 1.0 x 3.0 mm package. Each channel can be configured and enabled independently. This device features a linear voltage ramp under dynamic loading conditions. The ramp rate on each channel can be independently adjusted by the designer using external capacitors. The device can switch power rails in the range from 1.0 V to 5.5 V, up to 4.5 A continuous current for each channel. The load switch also includes discharge circuit, over current limit protection, short circuit protection and thermal shutdown protection.

“The dual channel 4.5 A load switch allows systems to implement power switch-over between primary and secondary power supply rails in a single device,” said John McDonald, Silego’s VP of Marketing. “Silego customers demand space efficiency. Silego responded with another world’s smallest load switch, one half the size of Silego’s previous record-setting generation.”

SLG59M1527V Features:

  • VDD: 2.5 V to 5.5 V
  • IDD (Standby): < 1 µA
  • Integrated discharge
  • Multiple protection modes

Target Applications:

  • Computing power rail switching
  • Primary and secondary power supply switching
  • Power sequencing

For high volume pricing, samples, datasheets and technical information about Silego's load switches please contact our four hour guaranteed response customer service team at: info@silego.com or visit our website: http://www.silego.com.

About Silego – The CMIC Company

Silego Technology, the CMIC Company, designs and sells highly configurable power, logic, and timing mixed signal IC products referred to as CMICs (Configurable Mixed-signal IC Products). CMIC products integrate analog components, discrete digital logic, and passive components into highly configurable small, easy to use, low cost ICs. CMIC products provide customers the benefits of reduced component count, lower power consumption, less board space and reduced BOM costs. Silego CMICs provide the speed and flexibility of an FPGA, with programmable analog and digital elements.

For media information contact:
Victoria Yatskulyak
Silego WW MarCom Manager
vitay@silego.com
408-327-8800


Silego Technology All of Silego's products are 100% RoHS compliant. Please visit our Support page for more information. Silego ISO Silego at Facebook Silego awards
©Silego Technology Inc. 2004-2014, 1515 Wyatt Drive, Santa Clara, CA 95054